• Home
  • Hitec High-Voltage Mega Torque HS-7950TH Digital Throttle Servo w/ Titanium Gears

Hitec High-Voltage Mega Torque HS-7950TH Digital Throttle Servo w/ Titanium Gears

$112.99
SKU: HT217

Out of Stock

ABOUT THIS PRODUCT:

Hitec High-Voltage Mega Torque HS-7950TH Digital Baja Throttle Servo w/ Titanium Gears

About

About

the "Ultra Torque" HS-7950TH is designed to operate on a two cell LiPo Pack. Featuring our high resolution "G2" second generation programmable digital circuit and our indestructible Titanium gears, The HS-7950TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7050TH include a 7.4v optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing. The HS-7950TH has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 403oz./in. of torque at 6.0 volts, while still maintaining a respectable 0.15 second transit time Specs Size Category:Standard Type:Digital Application:Larger Air and Surface products Torque:403 oz/in @ 6V, 486 oz/in @ 7.4V Speed:0.19/0.15 sec @ 60 deg. (4.8v/6v) Weight:2.34oz (66 g) Bushing Or Bearing:Bearing Bearing:Dual Motor Type:Coreless Gear Type:Metal Gear Material:Titanium

Programable Features Include: Dead Band Width Direction of Rotation Speed of Rotation (slower) End Points Neutral Points Fail Safe On/Off Fail Safe Point 1.Resolution (default is high resolution) 1.Overload Protection (default is off) 1.These features are only programable with the HFP-20, HPP-20 or HPP-21 programmers.

HS-7950TH Servo Specifications

Performance Specifications
Operating Voltage Range (Volts DC)6.0V ~ 7.4V
Speed (Second @ 60°)0.17 ~ 0.14
Maximum Torque Range oz. / in.403 ~ 486
Maximum Torque Range kg. / cm.29.0 ~ 35.0
Current Draw at Idle10 mA
No Load Operating Current Draw440 mA
Stall Current Draw9,000 mA
Dead Band Width2 µs
Physical Specifications
Dimensions (Inches)1.57 x 0.79 x 1.50
Dimensions (Metric)40.0 x 20.0 x 38.0
Weight (Ounces)2.29
Weight (Gram)65.0
Circuit TypeG2 Programable Digital
Motor TypeCoreless Metal Brush
Gear MaterialTitanium
Bearing TypeDual Ball Bearing
Output Shaft (type / Ømm)Standard 24
Case MaterialPlastic / Aluminum
Dust / Water ResistanceSplash Proof
Connector Gauge (AWG) / Strand Count22 / 60
Radio Control Applications
ParkflyerN / A
Sport Plane> 40%
Sailplane2 meters and up
3D Performance> 40%
Scale> 40%
Electric HelicopterN / A
Gas HelicopterN / A
On Road1/8th
Monster Truck1/8th
Buggies1/8th
Truggies1/8th
Short Course / Truck1/8th
Crawlers1/8th
Sail Boat= >1M & Scale
Power BoatN / A